Home / Products / Flagpoles / Flagpole Selector by Height and Flag Size: Mark, Series, Embedded Part

Flagpoles

Flagpole Selector by Height and Flag Size: Mark, Series, Embedded Part

Enter the flagpole height, and the selector shows the standard mark, series, flag size, embedded part and a “from” price. If you need a non-standard height, for example 33 or 86 m, it names the two nearest marks and an approximate mark by the scheme: such flagpoles are made on request.

Flagpole selection by height

The catalogue covers heights from 10 to 100 m in three series: FShR with a manual drive, FShL with a hand winch and FShP with an electric drive. Choose the drive by hand or leave the selection by height.

Flagpole parameters

The selection is approximate: we confirm the final mark, embedded part and cost for your site in the calculation.

Request a calculation and price

How to use the selector

  • enter the flagpole height in metres: for a standard height you see the mark, for a non-standard one the two nearest;
  • if needed, give the preferred flag length: the selector compares it with the standard length for the mark;
  • if you need a remote control, tick the box: a remote control is only in the FShP series, from 30 m;
  • the result includes the embedded part mark, the “from” price and a link to the questionnaire form for a quote.

Three flagpole series

The series depends on the height and how the flag is raised. Prices are given as “from”, for the standard marks of the series, including VAT.

SeriesCatalogue heightsFlag liftingRemote controlFlagpole price from, UAHEmbedded part from, UAH
FShR10–20 mmanual, halyard outside the shaftno25,0006,000
FShL20–30 mhand winchno200,00023,000
FShP30–100 melectric drive 220 or 380 Vyes500,00036,000

We calculate the final cost for your height, flag and conditions on request.

Which flag size to choose

The flag length is usually about a quarter of the flagpole height, that is 0.22–0.30 of the height. For a 40 m flagpole that is roughly 9–12 m, and the standard mark FShP-40-5.I-54 is designed for a 6 × 9 m flag.

If you need a larger flag than the standard one for the mark, we confirm the size and the mark in the calculation. More on choosing the height and the lifting method is in the article how to choose a flagpole.

What next: the mark, supply and a quote

How to read the mark and what 5.I and the FZ embedded part mean is explained in the article flagpole designations. What is supplied and what the customer provides is in the article flagpole scope of supply, and the differences between series are in flagpole series. What the price depends on: flagpole cost.

To get a quote, fill in the questionnaire form or send us the height, the flag size and the city, along with any question about a remote control and aviation warning lights.

Updated:

Frequently asked questions about choosing a flagpole

How do I choose a flagpole by height?

Enter the height in the selector: for a standard height it shows the mark, series, flag, embedded part and a “from” price.

What if I need a non-standard height?

We make any height, for example 33 or 86 m, on request. The selector shows the two nearest standard marks and an approximate mark by the scheme.

Is there a flagpole with a remote control for heights below 30 m?

A remote control is only in the FShP series, which starts at 30 m. For lower heights there is no remote control.

How much does a flagpole cost?

The price depends on the series: FShR from UAH 25,000, FShL from UAH 200,000, FShP from UAH 500,000 including VAT. The embedded part is priced separately.

Is the embedded part included in the flagpole price?

No, the embedded part (an anchor block) is priced separately: from UAH 6,000, 23,000 and 36,000 for the FShR, FShL and FShP series.

Get a quote for your requirements

Send us your requirements — we will calculate the price and lead time.

+38 (050) 685-93-45Request a quote