Light, connectivity, power — on our steel structures
For more than ten years, POLYGONAL has been manufacturing and designing steel multi-sided poles for power lines, lighting, communications and contact networks.
Choose your task below and we will show the product lines and photos of completed projects. Or send us the parameters and we will calculate the price and lead time.
Our products
Street and area lighting
Multi-sided steel poles for streets, roads, parks and industrial sites. Floodlight masts without reinforced concrete for ports, warehouses and industrial yards.
Poles and columns for street lighting and outdoor areas.
Specialised masts for professional floodlighting of open areas. Steel, no reinforced concrete.
We make brackets for luminaires, as well as caps and crossarms for floodlights on lighting columns and floodlight masts. Steel S245, hot-dip galvanising, marks per the catalogue.
A foundation anchor cage is a frame with anchor bolts (studs) that is cast into the foundation beforehand, so the pole is later set on the studs with no fitting on site. We make FPO, FPM and FKM cages for lighting columns, floodlight masts and catenary masts.
Power lines and substations
Custom-designed power line poles and standard steel structures for overhead lines of 0.4–750 kV. Multi-sided switchyard gantries on bent steel poles instead of outdated standard solutions.
Custom design of transmission line poles. Standard steel pole structures for overhead lines of 0.4–750 kV.
Individual design of switchyard gantries based on multi-sided bent steel poles instead of outdated standard solutions.
Metal fittings to standard albums: clamps, bolts, cross-arms, brackets, pole-top caps and similar.
Neat appearance, required height, room for extra equipment.
Communications and telecom
Telecom towers on multi-sided bent poles and space lattice antenna towers for base stations and radio-relay links. Installation is carried out by a licensed construction partner company.
Antenna masts and towers for cellular networks on multi-sided bent poles, galvanised. Design and manufacture; installation is carried out by a licensed construction partner company.
Space lattice towers for base stations, antennas and radio-relay links. A rigid, lightweight structure designed for great heights.
Stadiums and sports grounds
Floodlight masts and lighting layouts for stadiums, football pitches and tennis courts. The lighting calculation is free.
Floodlight masts and lighting layouts for stadiums, football pitches and tennis courts. Free lighting calculation.
We calculate the lighting for stadiums, streets, parks, car parks and industrial sites: where to put the masts, how many floodlights you need and of what power, and what illuminance you will get on the ground. The calculation is free, and we send the PDF within a week.
Roads and city transport
Cantilever poles for traffic lights and road signs, poles for tram and trolleybus catenary, poles for CCTV cameras. Steel, galvanised.
Cantilever poles for traffic lights and road signs. Steel, galvanised.
Poles for tram and trolleybus catenary. Steel, galvanised.
Poles with camera brackets for sites, roads and railway facilities. Height, bracket reach and equipment mounts to suit your task.
Flagpoles and structures to your drawings
Galvanised steel flagpoles of any height. We fabricate steel structures to your drawings: sheet cutting, press bending and hot-dip galvanising.
Steel flagpoles of any height, galvanised.
We fabricate steel structures to your drawings and to our own designs: sheet cutting, press bending, welding, hot-dip galvanising and quality control — a full in-house cycle. The shop’s capacity is 500 t per month.
We bend sheet metal on a hydraulic press with a 12 m bend length and 2000 t of force. It takes sheet up to 25 mm thick and up to 12 m long.
We provide hot-dip galvanising of steel structures by immersion in molten zinc. We galvanise multi-sided poles, road barriers, corrugated structures, power line poles and other products.
Completed projects
Substations, stadiums, telecom towers, grain elevators, flagpoles: sites across Ukraine.
Buzova Arena
16 m mast; football pitch 100×65 m; illuminance 250 lx.
Prymorsk wind farm 2 substation
Multi-sided steel gantries 150 kV, hot-dip galvanised.
Grain elevator
Lighting of the elevator site: multi-sided poles 10 m and 8 m high; anti-corrosion coating — hot-dip galvanising.
Telecom tower
Telecom tower 35 m high; operator Vodafone.
Spartak Arena
16 m mast with LED floodlights; football pitch 100×60 m; illuminance 200 lx.
Flagpole
30 m flagpole with night illumination of the flag and an electric lifting mechanism; 6×10 m flag; the coat of arms of Ukraine on top.
Youth Palace
16 m mast with LED floodlights; football pitch 100×60 m; illuminance 200 lx.
Sports ground
20 m mast with a ladder and a fixed fall-protection system with folding rest platforms; metal-halide floodlights; pitch 100×60 m; illuminance 200 lx.
Services
Design, bending, galvanising and fabrication of steel structures: from drawing to finished product.
Hot-dip galvanising
We provide hot-dip galvanising of steel structures by immersion in molten zinc. We galvanise multi-sided poles, road barriers, corrugated structures, power line poles and other products.
MoreSheet metal bending
We bend sheet metal on a hydraulic press with a 12 m bend length and 2000 t of force. It takes sheet up to 25 mm thick and up to 12 m long.
MoreSteel structure design
We develop structural (KM) and detail (KMD) drawings of steel structures for civil and industrial sites. Most of our engineers have more than ten years of experience.
More
Custom fabrication
We fabricate steel structures to your drawings and to our own designs: sheet cutting, press bending, welding, hot-dip galvanising and quality control — a full in-house cycle. The shop’s capacity is 500 t per month.
More
Why POLYGONAL
Full cycle
We control the whole process: design, manufacture, galvanising, quality control and shipping. The shop’s capacity is 500 t per month.
Hot-dip galvanising
Corrosion protection of structures by hot-dip galvanising to DSTU EN ISO 1461:2024.
Bending up to 25 mm and 12 m
A 12 m hydraulic press with 2000 t of force bends sheet up to 25 mm thick.
Individual calculation
We calculate each structure for your site: height, loads and operating conditions.
Installation across Ukraine
A licensed construction partner company erects poles, towers and masts across the whole country.
Certification
Certificates of conformity for power line poles, switchyard gantries, outdoor lighting, microwave-relay and urban contact-network poles. Copies are on the About us page.
How to order
Send the parameters
Height, load, installation site, quantity: via the website form or by phone.
Get a quote
Cost and lead time.
Approve the project
Drawings and specification.
Manufacture and installation
We manufacture, galvanise, ship and, if needed, arrange installation by our partner.
Product catalogue
Park, street and road lighting columns, floodlight masts, catenary masts, crossarms, caps and anchor cages. 19 pages, in English.
They trust us
Frequently asked questions
Can’t find an answer? Call us or send the parameters, and we will calculate the price and lead time.
Request a quoteHow can I find the price of a pole?
The price depends on the height, load and coating. Send the parameters through the form or call +38 (050) 685-93-45 — we will calculate the price and the lead time.
Do you make poles to an individual design?
Yes. We calculate each structure for your site: height, load and operating conditions. Structures for 0.4–10 kV power lines are also made to standard design albums.
Do you do hot-dip galvanising?
Yes, by immersion in molten zinc to DSTU EN ISO 1461:2024. We galvanise multi-sided poles, road barriers, corrugated structures, power line poles and other products. About galvanising
Do you install the structures?
Yes, through a partner: a licensed construction partner company erects poles, towers and masts across Ukraine.
What documents confirm quality?
Certificates of conformity for power line, switchyard, lighting, telecom and contact-network pole structures. Copies are on the About us page.
What is the lead time for manufacture?
If the product is not in stock, the typical lead time is 3–4 weeks. We confirm the exact timing after the calculation.
Get a quote for your requirements
Send us your requirements — we will calculate the price and lead time.